FabricIQ
Reading the label…
01Verdict
Safe to wear, but flimsy build.
Best for Safe basics, but expect to replace it sooner.
Material C · 68Health A · 100Eco · 82Label · low
Why this material grade?
This product scored 68/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 50% Organic Cotton, 50% Recycled Cotton. Sustainability is scored separately as the Eco Rating. Blended from 50% Organic Cotton, 50% Recycled Cotton — the score is a weighted average based on each material's proportion.
C (55-69): Average material composition — typical blend, reasonable for everyday wear.
Everyday quality
This fabric does the job for daily wear. Not premium, not bad — it's the middle of the road. At least it's easy to care for.
Premium fabric, premium price
$159Better-than-typical fabric, but priced above the category median.
$2.34 per quality point Category median: $115 · grade C
Fabric value only — compares material quality to price vs other sweaters. Construction, fit, and brand aren't measured.
02Breakdown
Composition
50% Organic Cotton, 50% Recycled Cotton
All-natural, organic source
Added Apr 5, 2026 · Data last updated Jun 10, 2026
Sustainability is scored separately — see the Eco Rating below.
🌱
Cotton biodegrades in 1-5 months. When you're done with this, it returns to the earth — not the ocean.
♻️
Recycled synthetic reduces virgin plastic use, but still sheds microfibers. Better than new plastic, but natural is best.
03Network
Cost per wear
rough estimate$2.27/wear · 70 expected wears
Investment piece — wear it
How we got there
Base for Sweaters: 100 expected wears.
× 0.70 for Organic Cotton (low-durability fiber, durability 53).
= 70 expected wears. $159 ÷ 70 ≈ $2.27/wear.
Missing GSM — this is a category-level estimate, not garment-specific. Expect ±30% variance.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
warm (40°C)
Bleach
Oxygen only
Dry
tumble medium
Best For
👕Everyday Casual
ExcellentExcellent comfort (76) and easy care (73) for daily wear
🌱Sustainable Fashion
ExcellentExcellent sustainability (82) and biodegradable — great eco choice
😴Sleepwear
GoodGood comfort (76) and breathability (82) for sleeping
🩲Underwear
GoodGood breathability (82) and comfort (76) for undergarments
Better Alternatives
Higher-rated sweaters products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
A100/100
Low health impact — predominantly natural fibers with no major treatment flags.
Microplastics LOW
Minimal
Skin contact LOW
0% synthetic
Chemicals LOW
No flags
Label Confidence
LOWLabel confidence low — multiple signals suggest the composition may be incomplete, vague, or hard to verify. Treat scores as directional.
- ⚠Organic cotton claim without explicit certification (GOTS, OCS). Check brand's certification disclosures separately.
- ⚠Recycled-fiber claim without explicit certification (GRS, RCS). Chain-of-custody for recycled materials is hard to verify without one.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
