FabricIQ
Reading the label…
01Verdict
Average across the board — nothing stands out, nothing's alarming.
Best for Workhorse basics; replace when worn out.
Material C · 69Health C · 69Eco · 60Label · high
Why this material grade?
This product scored 69/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 68% Cotton, 30% Lyocell, 2% Elastane. Sustainability is scored separately as the Eco Rating. Blended from 68% Cotton, 30% Lyocell, 2% Spandex — the score is a weighted average based on each material's proportion.
C (55-69): Average material composition — typical blend, reasonable for everyday wear.
Average quality, high synthetic content
Decent for everyday wear, but the synthetic content means microplastic shedding and it won't biodegrade. Consider natural alternatives for your next purchase.
Great fabric value
$129Better-than-typical fabric for this category, at a below-median price.
$1.87 per quality pointCategory median: $148 · grade C
Fabric value only — compares material quality to price vs other pants. Construction, fit, and brand aren't measured.
02Breakdown
Composition
68% Cotton, 30% Lyocell, 2% Elastane
Mostly natural with stretch
Fabric details
eVent™DWR
Twill construction
Likely chemical finishes
⚠ Durable water repellent · PFAS
Stated on the product page — not lab-tested. Not medical advice.
Care (from the label)
Machine wash cold
Added Jun 7, 2026 · Data last updated Jun 7, 2026
Sustainability is scored separately — see the Eco Rating below.
🌍
This fabric will take 200+ years to decompose. That means a shirt you buy today will still exist in the year 2226.
🧺
Dryer heat destroys spandex/elastane over time. Your leggings and stretchy clothes will last 2x longer if you skip the dryer.
⚖️
Lyocell (score 80) is carrying this blend. Spandex (score 55) is pulling it down.
03Network
Performance
spec sheet- Construction
- Twill
Diagonal weave — durable, drapey
Cost per wear
rough estimate92¢/wear · 140 expected wears
Reasonable cost-per-wear
How we got there
Base for Pants: 200 expected wears.
× 0.70 for Cotton (low-durability fiber, durability 62).
= 140 expected wears. $129 ÷ 140 ≈ 92¢/wear.
Missing GSM — this is a category-level estimate, not garment-specific. Expect ±30% variance.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
cold (30°C)
Bleach
Do not bleach
Dry
line dry
Iron
Best For
👕Everyday Casual
ExcellentExcellent comfort (82) and easy care (71) for daily wear
👔Formal/Office
GoodGood durability (62) and comfort (82) for office wear
😴Sleepwear
GoodGood comfort (82) and breathability (83) for sleeping
🩲Underwear
GoodGood breathability (83) and comfort (82) for undergarments
🌱Sustainable Fashion
GoodGood sustainability score (60)
Better Alternatives
Higher-rated pants products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
C69/100
Moderate health impact — some synthetic content or possible chemical treatments. Rotate with natural-fiber alternatives where you can.
MicroplasticsLOW
Very low
Skin contactLOW
2% synthetic
ChemicalsHIGH
PFAS
- PFAS (likely): "Durable water repellent" stated on the product page — observed, not inferred.
Biodegradability
Not BiodegradableMaterials will persist in the environment for decades.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
