FabricIQ
Reading the label…
B
71/100
01Verdict
Well-made, but plastic on skin.
Best for Outerwear or layers — not for direct skin contact.
Material B · 71Health F · 32Eco · 45Label · highMade in El Salvador230 gsm
Why this material grade?
This product scored 71/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 47% Merino Wool, 42% Nylon, 11% Spandex. Sustainability is scored separately as the Eco Rating. Blended from 47% Merino Wool, 42% Nylon, 11% Spandex — the score is a weighted average based on each material's proportion.
B (70-84): Good material composition — above average across most axes.
Good quality
Well-balanced fabric that should serve you well. The natural-synthetic blend offers durability with comfort. Follow the care guide to maximize lifespan.
Great fabric value
$199Better-than-typical fabric for this category, at a below-median price.
$2.80 per quality pointCategory median: $225 · grade C
Fabric value only — compares material quality to price vs other jackets. Construction, fit, and brand aren't measured.
02Breakdown
Composition
47% Merino Wool, 42% Nylon, 11% Spandex
Mostly natural with stretch
Fabric details
Polartec™
Fleece construction · 230 g/m² · Made in El Salvador
Care (from the label)
Machine washableLine dryIron lowDo not bleachDry clean OK
Added Jun 7, 2026 · Data last updated Jun 7, 2026
Sustainability is scored separately — see the Eco Rating below.
⚠️
Synthetic fabrics can contain BPA, which mimics estrogen. Studies have found BPA transferring to skin through sweat contact.
🌍
This fabric will take 200+ years to decompose. That means a shirt you buy today will still exist in the year 2226.
🧺
Dryer heat destroys spandex/elastane over time. Your leggings and stretchy clothes will last 2x longer if you skip the dryer.
03Network
Performance
spec sheet- Fabric weight
- 230 g/m²
- Construction
- Fleece
- Assembled in
- El Salvador
Heavyweight
Brushed knit — warm, soft
Cost per wear
estimated83¢/wear · 240 expected wears
Reasonable cost-per-wear
How we got there
Base for Jackets: 200 expected wears.
× 1.20 for 230 g/m² (heavyweight).
× 1.00 for Merino Wool (mid-durability fiber, durability 78).
= 240 expected wears. $199 ÷ 240 ≈ 83¢/wear.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
cold (30°C)
Bleach
Do not bleach
Dry
flat dry
Iron
Best For
👔Formal/Office
ExcellentExcellent durability (78) and comfort (70) for office wear
🧥Winter Outerwear
GoodGood warmth (60) for cold weather
👕Everyday Casual
GoodGood comfort (70) and care ease (67) for casual wear
🌧️Rain/Weather
GoodGood moisture wicking (68) and durability (78) for weather protection
⛰️Outdoor/Hiking
GoodGood durability (78) and breathability (57) for outdoor activities
Better Alternatives
Higher-rated jackets products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
F32/100
High health impact — significant synthetic content or likely chemical treatments. For frequent skin-contact wear, consider a natural-fiber alternative.
MicroplasticsHIGH
500,000 fibers/wash
Skin contactMODERATE
53% synthetic
ChemicalsHIGH
PFAS
- PFAS (likely): 53% synthetic outerwear is typically treated with PFAS-based DWR (durable water repellent) for water resistance.
Biodegradability
Not BiodegradableMaterials will persist in the environment for decades.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
