FabricIQ
Reading the label…
B
84/100
01Verdict
Strong across the board — well-made, safe to wear, and low planet cost.
Best for Daily wear, no caveats.
Material B · 84Health B · 70Eco · 80Label · high135 gsm
Why this material grade?
This product scored 84/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 60% Merino Wool, 40% Tencel. Sustainability is scored separately as the Eco Rating. Blended from 60% Merino Wool, 40% Tencel — the score is a weighted average based on each material's proportion.
B (70-84): Good material composition — above average across most axes.
Good quality, eco-friendly
Solid fabric with strong environmental credentials. Merino Wool (60%) is doing the heavy lifting. This is a smart buy.
Great fabric value
$70Better-than-typical fabric for this category, at a below-median price.
$0.83 per quality pointCategory median: $100 · grade C
Fabric value only — compares material quality to price vs other shirts. Construction, fit, and brand aren't measured.
02Breakdown
Composition
60% Merino Wool, 40% Tencel
All-natural fiber
Fabric details
Tencel™
135 g/m²
Likely chemical finishes
⚠ Antimicrobial biocide · biocide
Stated on the product page — not lab-tested. Not medical advice.
Care (from the label)
Machine washableLine dryIron lowDo not bleachDry clean OK
·
Sustainability is scored separately — see the Eco Rating below.
🐑
Wool is naturally antibacterial and self-cleaning. You can air it out between wears instead of washing — it'll stay fresh.
🦄
This is a unicorn — high quality, eco-friendly, AND biodegradable. If it fits, keep it forever.
03Network
Performance
spec sheet- Fabric weight
- 135 g/m²
Mid-weight
Cost per wear
estimated82¢/wear · 85 expected wears
Reasonable cost-per-wear
How we got there
Base for Shirts: 100 expected wears.
× 0.85 for 135 g/m² (mid-weight).
× 1.00 for Merino Wool (mid-durability fiber, durability 70).
= 85 expected wears. $70 ÷ 85 ≈ 82¢/wear.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
cold (30°C)
Bleach
Do not bleach
Dry
flat dry
Iron
Best For
🏃Athletic Wear
ExcellentExcellent breathability (85) and moisture wicking (83) for active sports
👔Formal/Office
ExcellentExcellent durability (70) and comfort (89) for office wear
😴Sleepwear
ExcellentExcellent comfort (89) and breathability (85) for sleeping
🩲Underwear
ExcellentExcellent breathability (85) and comfort (89) for undergarments
🌱Sustainable Fashion
ExcellentExcellent sustainability (80) and biodegradable — great eco choice
🧥Winter Outerwear
GoodGood warmth (71) for cold weather
Better Alternatives
Higher-rated shirts products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
B70/100
Moderate health impact — some synthetic content or possible chemical treatments. Rotate with natural-fiber alternatives where you can.
MicroplasticsLOW
Minimal
Skin contactLOW
0% synthetic
ChemicalsHIGH
Biocide
- Biocide (likely): "Antimicrobial biocide" stated on the product page — observed, not inferred.
How we score healthNot medical advice — based on material composition.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
