FabricIQ
Reading the label…
C
59/100
01Verdict
Safe to wear, but rough on the environment.
Best for Safe to wear; production isn't clean — donate when done.
Material C · 59Health B · 75Eco · 36Label · highMade in Mexico, Nicaragua or the United States220 gsm
Why this material grade?
This product scored 59/100 on the material-quality rubric (durability, comfort, breathability, warmth, moisture-wicking, care-ease), based on its composition of 52% Cotton, 48% Polyester. Sustainability is scored separately as the Eco Rating. Blended from 52% Cotton, 48% Polyester — the score is a weighted average based on each material's proportion.
C (55-69): Average material composition — typical blend, reasonable for everyday wear.
Average quality, high synthetic content
Decent for everyday wear, but the synthetic content means microplastic shedding and it won't biodegrade. Consider natural alternatives for your next purchase.
Budget pick
$33Below-typical fabric quality, but cheaper than the category median.
$0.56 per quality point Category median: $115 · grade C
Fabric value only — compares material quality to price vs other sweaters. Construction, fit, and brand aren't measured.
02Breakdown
Composition
52% Cotton, 48% Polyester
Mixed blend — natural + synthetic
Fabric details
220 g/m² · Made in Mexico, Nicaragua or the United States
Added Apr 26, 2026 · Data last updated Apr 26, 2026
Sustainability is scored separately — see the Eco Rating below.
🔬
Every wash of synthetic fabric releases up to 700,000 microplastic fibers into waterways. Use a Guppyfriend bag to catch them.
🌍
This fabric will take 200+ years to decompose. That means a shirt you buy today will still exist in the year 2226.
⚠️
Synthetic fabrics can contain BPA, which mimics estrogen. Studies have found BPA transferring to skin through sweat contact.
03Network
Performance
spec sheet- Fabric weight
- 220 g/m²
- Assembled in
- Mexico, Nicaragua or the United States
Heavy-tee weight
Cost per wear
estimated33¢/wear · 100 expected wears
Strong cost-per-wear
How we got there
Base for Sweaters: 100 expected wears.
× 1.00 for 220 g/m² (heavy-tee weight).
× 1.00 for Cotton (mid-durability fiber, durability 72).
= 100 expected wears. $33 ÷ 100 ≈ 33¢/wear.
Real life is messier than a formula: how often you wash, how you wash, whether you wear it inside-out, dry on low — all of it shifts the number. This is the ceiling under reasonable care.
Care Guide
Decode symbolsWash
warm (40°C)
Bleach
Do not bleach
Dry
tumble low
Best For
👕Everyday Casual
GoodGood comfort (63) and care ease (82) for casual wear
👔Formal/Office
GoodGood durability (72) and comfort (63) for office wear
⛰️Outdoor/Hiking
GoodGood durability (72) and breathability (59) for outdoor activities
Better Alternatives
Higher-rated sweaters products — each card shows how much better this alt scores vs your current product.
04Tradeoffs
Health Impact
Microplastic shedding · skin-contact synthetic load · likely chemical treatments
B75/100
Low health impact — predominantly natural fibers with no major treatment flags.
Microplastics MEDIUM
700,000 fibers/wash
Skin contact MODERATE
48% synthetic
Chemicals LOW
Antimony
- Antimony (trace): Virgin polyester contains trace antimony from PET production. Recycled polyester reduces but does not eliminate it.
48% synthetic content (polyester). Moderate microplastic shedding — a washing bag catches 86% of fibers.
Biodegradability
Not BiodegradableMaterials will persist in the environment for decades.
What this score doesn't measure
- ×Fiber grade. Staple length, micronaire, strength. "100% cotton" could be short-staple upland or long-staple Pima — same label, very different fabric.
- ×Yarn processing. Singles count, ply (single vs two-ply), spinning method (open-end vs ring-spun vs compact), mercerization. Invisible from any label.
- ×Knit / weave structure. Single jersey vs interlock, knit tightness. A loose knit pills; a tight knit lasts.
- ×Fabric weight (GSM). One construction signal among several — and high GSM can come from loose cheap yarn just as easily as from fine tight yarn. We have it for blank manufacturers, rarely for retail.
- ×Pre-shrink processing. Sanforized cotton shrinks ~1%; non-sanforized can shrink up to 10%. Not visible from the composition tag.
- ×Construction quality. Stitch density (SPI), seam types, collar geometry, manufacturing tolerances (AQL). These often matter more than the fiber itself.
- ×Specific chemical loads. Health Impact flags "likely PFAS / possible formaldehyde" from composition × category — we don't lab-test individual SKUs.
We rate the fabric, not the garment. Composition is the floor of what you're guaranteed to be getting — most shoppers don't have that.
05Action
